Home / Women / Jackets / #5324 Asian jacket
Difficulty: **
You will need: silk, lining, fusing.
Attention! Fabric consumption varies depending on the size of garment. First of all, print out paper patterns and lay them out at the width of fabric/ knit you plan to use, to see how much fabric you will need.
When sewing the garment, pay attention to notches- they must coincide.
Cutting:
Fabric:
1. Center back part - 2 pieces
2. Side back part - 2 pieces
3. Side front part - 2 pieces
4. Back neckline facing - 1 piece
5. Inner collar - 1 piece
6. Outer collar - 1 piece
7. Center front part - 2 pieces
8. Front facing - 2 pieces
9. Upper sleeve - 2 pieces
10. Lower sleeve - 2 pieces
11. Cuff - 2 pieces
12. Tie - 8 pieces
Lining:
1. Center back part - 2 pieces
2. Side back part - 2 pieces
3. Side front part - 2 pieces
4. Center front part - 2 pieces
5. Upper sleeve - 2 pieces
6. Lower sleeve - 2 pieces
Fusing: front facing, back neckline facing, cuff, inner collar.
Instructions:
1. Apply the fusing to wrong side of front facing, back neckline facing, cuff, inner collar.
2. Lay outer collar on inner one and overstitch inner collar with outer one. Slash collar corners, then turn them right side out.
3. Stitch front and back princess seams and press them apart.
4. Lay ties together and overstitch them along outer contour; do not stitch lower edge. Turn tie right side out and press. Lay the tie on right side of center front part. Adjust lower edges of tie to edging overstitching allowance and fix the tie with reverse stitch.
5. Pin front facing to front part right sides together and overstitch them along edging line (at front part side up to the notch that points the end of stitching collar in). Stitch front facings' hems to front part along marked hem line. Cut edging upper/lower corners. Topstitch the allowance of overstitching of edging as follows: topstitch it on front facing at closure segment, topstitch it on front edging at lapel segment (stitching goes 0.2 cm (1/16") from the seam). Turn edgings right side out.
6. Stitch back middle seam and press it out.
7. Stitch side/shoulder seams and press them apart.
8. Stitch shoulder edges of back neckline facing and front facings and press them apart.
9. Stitch inner collar into jacket neckline; stitch outer collar to front facing with facing.
10. Stitch elbow seam and press them apart. Fold the cuff along the center and press it. Stitch cuff's upper edge to sleeve hem. Stitch sleeve front seam to cuff side edge with single seam.
11. Stitch sleeves into armholes according to notches. Stitch shoulder pads.
10. Stitch lining details, stitch lining sleeves into armholes leaving a slit into sleeve right front seam. Press the lining. Stitch the lining to front facings' inner edges, as well as to back neckline facing. Press allowances of seam joining the collar apart and fix close to seams. Stitch lining sleeves to cuff lower edge and to garment hem. Turn the jacket right side out through the slit in sleeve. Stitch the slit in the sleeve.
