Home / Women / Blouses / #5330 Blouse with asymmetrical shoulder
Difficulty: **
You will need: knitwear.
Attention! Fabric consumption varies depending on the size of garment. First of all, print out paper patterns and lay them out at the width of fabric/ knit you plan to use, to see how much fabric you will need.
When sewing the garment, pay attention to notches- they must coincide.
Cutting :
Fabric:
1. Back part - 1 detail
2. Front part - 1 detail
3. Right sleeve front part - 1 detail
4. Right sleeve back part - 1 detail
5. Left sleeve - 1 detail
6. Left sleeve coulisse - 1 detail
Advice: to prevent seam from stiffing, sew details with special (zig zag) stitch. To prevent hem from stiffing serge it with overlock and then stitch using double needle. Do the same for all edges which must stay elastic. The above is not for industrial manufacturing.
Instructions:
1. Serge right sleeve center edges. Sew sleeve center seam leaving a slit; be guided by notches. Press sleeve outer seam apart. Topstitch allowances at 0.7 cm (1/4") from joining seam; stop stitching 2 cm (3/4") before hem and leave a slit into stitch (close to lower notch for pulling in the tie).
2. Lay coulisse stripe on sleeve wrong side according to marks, turn stripe lower end out. Topstitch the stripe along marking.
3. Cut ties. Fold each stripe along the center and make a stitch at 0.5 cm (3/16") from bend. Turn ties right side out and press. Turn ends in and sew.
4. Sew shoulder/side seams and serge them. Press shoulder/side seams backwards.
5. Sew sleeve inner seams and serge them. Press seams backward.
6. Sew sleeves into armholes according notches.
7. Serge front/back neckline edges, garment hem and sleeve hems. Turn sergeed edges under and topstitch them. Turn ties into coulisse. Gather the linen along ties; pull ties ends together.
