Home / Girls / Pants / #7044 Trousers with wide waistband

example - #7044 Trousers with wide waistband preview - #7044 Trousers with wide waistband

Difficulty: *

You will need: semi-wool or cotton stretch fabric, elastic gaberdine; lining; fusing; 1 zipper; 1 button.

Attention! Fabric consumption varies depending on the size of garment. First of all, print out paper patterns and lay them out at the width of fabric/ knit you plan to use, to see how much fabric you will need.

When sewing the garment, pay attention to notches- they must coincide.

Cutting :

Fabric:

1. Button catch - 1 detail
2. Pocket facing - 2 details
3. Cut side - 2 details
4. Waistband right part - 2 details
5. Waistband left part - 2 details
6. Waistband back part - 2 details
7. Front part - 2 details
8. Back part - 2 details

Lining:

1. Lower pocket bag - 2 details
2. Upper pocket bag - 2 details

Fusing: waistband details, button catch.

Instructions:

1.Apply the fusing to wrong side of waistband and button catch.

2.Serge facing edges of pockets and cut sides. Place facings on upper pocket bags and sides on lower pocket bags, then topstitch. Topstitch pocket facings on pocket entrances right sides together. Cut joining seam allowance to 0.5 cm (3/16") width. Turn facings into wrong side. Topstitch pocket entrances along the edges. Pin front parts on cut sides along marking, tack pocket entrances. Sew pocket bags.

3.Fold front parts right sides together. Sew front middle seam 2 cm (6/8") before leg inside seam.

4.Press zipper closure one-piece facing into wrong side. Sew the zipper under closure allowance left edge. Sew zipper free braid on right edge to one-piece facing. Fold the button catch along the center, wrong side together, then serge along short and long edges. Topstitch zipper closuew one-piece facing on the garment left edge button catch. Topstitch slit roght edge catching the facing.

5.Sew side and inside leg seams. Sew back edge and unsewn part of front edge in one seam. Press allowances apart to roundings.

6.Sew side seams in inner and outer yokes. Sew upper yoke and garment upper edge, right sides together. Press the joining seam towards the yoke. Put the inner yoke on the outer sewn yoke, right sides together, sew upper and front edges of inner and outer yokes. Turn yokes right side out, press, then topsting along the joining seam.

7.Press hem into wrong side, then topstitch.

8.Make a buttonhole into waistband right edge. Sew the button on left one.



Free sewing patterns (PDF) available for download

Please review Our Sizing Charts

No Patterns Available for Download


back to home page