Home / Girls / Coats / #7063 Padded coat
Difficulty: **
You will need: Windbreaker/ water-resistant fabric.
Attention! Fabric consumption varies depending on the size of garment. First of all, print out paper patterns and lay them out at the width of fabric/ knit you plan to use, to see how much fabric you will need.
When sewing the garment, pay attention to notches- they must coincide.
Cutting :
Fabric:
1. Back part - 1 folded detail
2. Off-set welt - 2 details
3. Pocket bag - 2 details
4. Front part - 2 details
5. Front facing - 2 details
6. Collar - 2 details
7. Sleeve - 2 details
8. Hood side - 2 details
9. Hood center - 1 detail
Lining:
1. Back part - 1 folded detail
2. Front part - 2 details
3. Sleeve - 2 details
4. Hood side - 2 details
5. Hood center - 1 detail
Warmer: apply the warmer to wrong side of back/front parts, sleeves, outer collar and hold parts (topstitch them along center).
Instructions:
1. Apply the fusing to wrong side of off-set welt.
2. Make SLIT POCKETS WITH OFF-SET WELT at side front parts: press off-set welts along the center right side out. Apply 2 cm (6/8")stripe of fusing to wrong side of front part above pocket marking. Lay pocket welt and fabric pocket bag on front part, right sides together, pin along pocket entrance marking and stitch (welt lengthwise/pocket bag edges must coincide with pocket marking center). Cut front part between stitches, diagonally to stitch ends. Do not cut welts and pocket bags! Press seam allowances apart. Turn welts and pocket bags to wrong side through a slit, then tack. Lay lower pocket bag on welt at front wrong side (turn pocket bag upwards), and topstitch the welt on joining seam on right side, catching pocket bag. Press pocket bag downwards. Turn small triangles at slit ends to wrong side and stitch, with welts ends, strictly between upper stitch ends and lower stitch ends. Cut pocket bag, adjust and stitch.
3. Sew garment side/shoulder seams.
4. Lay outer collar and inner collar right sides together and overstitch them along ends and flying part. Turn the collar right side out and press it.
5. Sew hood parts. Topstitch the hold along center part.
6. Sew sleeve seams. Sew sleeves into armholes. Press garment/sleeve hems to wrong side.
7. Sew lining details leaving a slit (to turn the garment right side out) into one of sleeves. Stitch front facing to lining. Lay the lining on the garment and overstitch along all edges inserting the hood and the collar between lining neckline and garment neckline. Turn the garment right side out and stitch the slit. Sew lining sleeve hem to fabric hem allowance neatly.
8. Topstitch Velcro pieces on right front part; topstitch Velcro on left front part.