Home / Men / Pants / #6110 Pants with side insert

example - #6110 Pants with side insert preview - #6110 Pants with side insert

Difficulty: *

You will need: whipcord; lining; fusing; elastic braid of 4.5 cm (1-6/8") width for waistband; elastic cord for pants hem; 4 metal clocks; cord for waistband; trimming cord.

Attention! Fabric consumption varies depending on the size of garment. First of all, print out paper patterns and lay them out at the width of fabric/ knit you plan to use, to see how much fabric you will need.

When sewing the garment, pay attention to notches- they must coincide.

Cutting:

Fabric:

1. Front part – 2 pieces
2. back part – 2 pieces
3. Front insert – 2 pieces
4. Back insert – 2 pieces
5. Waistband – 1 piece
6. Pocket bag – 4 pieces
7. Side part – 2 pieces

Cut bias 2 fabric stripes of 3.5 cm (1-3/8") width for trimming. Stripes’ length depend on trimming’s length. NB! After trimming is ready, there must remain seam allowance of 1 cm (3/8"). Otherwise, one must regulate width of cut stripes self.

Lining:

1. Front part – 2 pieces
2. Back part – 2 pieces

Instructions:

1. Reinforce pocket entrance at pocket bag. Stitch pocket bags along pocket entrance and turn into right side. Topstitch pocket entrance. Lay pocket bags on side part along coincidence line and stitch all details to front part. Topstitch the seam.

2. Stitch stripes together, press seams. Fold ready stripe along the center, insert the cord and make a stitch along cord’s contour.

3. Stitch side inserts to front/back parts inserting trimming. Stitch side seams, then topstitch. Stitch middle seams, topstitch along left part.

4. Mark lines of topstitching the elastic braid at waistband. Pierce 2 holes (at 8 cm (3-1/8") distance) for cord between topstitchings at front part’s middle seam level. Stitch separately waistband and elastic braid in ring. Insert elastic braid into waistband, stretch the braid to waistband’s length and make 2 decorative stitches. Stitch the waistband to pants catching elastic braid.

5. Stitch lining’s side seams and middle seam. Stitch the lining to garment’s waistband.

6. Set blocks into hems. Press hems first at 1 cm (3/8"), then 3.5 cm (1-3/8") under.

7. Stitch fabric/lining inside leg seams.

8. Topstitch hems.

9. Press ready pants.

10. Pull cords into pant hems.



Free sewing patterns (PDF) available for download

Please review Our Sizing Charts

No Patterns Available for Download

blog comments powered by Disqus