Home / Girls / Pants / #7053 Red jeans

example - #7053 Red jeans preview - #7053 Red jeans

Difficulty: **

You will need: denim with lycra; decorative fabric; fusing; 1 zipper; 1 button.

Attention! Fabric consumption varies depending on the size of garment. First of all, print out paper patterns and lay them out at the width of fabric/ knit you plan to use, to see how much fabric you will need.

When sewing the garment, pay attention to notches- they must coincide.

Cutting :

Fabric:

1. Front side part - 2 details
2. Front pocket bag - 2 details
3. Upper front part - 2 details
4. Button catch - 1 detail
5. Lower front part - 2 details
6. Back part - 2 details
7. Waistband - 1 detail
8. Belt loop - 4 details

Decorative fabric:

1. Figure facing - 2 details
2. Slit facing - 4 details
3. Back yoke - 2 details

Fusing: waistband, slit facing, buttn catch.

Instructions:

1.Apply the fusing to wrong side of waistband, button catch and slit facing.

2.Sew figure facing to front parts (do not forget to serge their lower edges). Topstitch pocket bag on pocket entrances, right sides together. Cut joining seam allowances to 0.5 cm (3/16") width. Turn the pocket bag into wrong side. Topstitch entrances on 0.75 cm (1/4"). Pin front parts on cut sides along marking, tack to entrances up and down. Stitch pocket bag from wrong side on the one-piece pocket bags with sides. Tack cut sides and front parts.

3.Sew front upper parts and front lower parts. Press allowances upwards and topstitch.

4.Sew front parts right sides together under slit mark along front middle seam, stop sewing 2 cm (6/8") before inside leg seam.

5.Press closure one-piece facing into wrong side. Sew the zipper under closure allowance. Sew zipper free band to right part to one-piece facing. Fold the button catch along the center its right side out, then serge along long and short edges. Topstitch closure one-piece facing onto the zipper on the burron catch (on garmant left part). Topstitch slit right edge catching facing.

6.Sew inside leg and side seams to notch marking. Sew back edge and unsewn part of font edge with one stitch. Press allwances apart, downward roundings.

7.Sew belt loops along long and one of short edges.

8.Sew the waistband and garment upper edge, right sides together; leave closure projecting allowance at waistband left end. When sewing, insert belt loop's raw ends between the garment and the waistband. Press joining seam allowance to the waistband. Fold the waistband its wrong sides out along the center, then sew short ends. Turn the waistband right side out, then topstitch strictly along joining seam on the garment right side. Topstitch belt loops overstitched ends on the waistband.

9.Fold slit facing along the center right sides together, then overstitch one short edge. Turn facing into right side and press them along the center. Sew facings to garment wrong side coinciding edges. Turn facings into right side, then topstitch along the marking.

10. Turn hem allowances into wrong side, then topstitch.

11.Make a buttonhole into waistband tight end, sew the button on the right one.



Free sewing patterns (PDF) available for download

Please review Our Sizing Charts

No Patterns Available for Download

blog comments powered by Disqus